Gsxr ecm f code oriblems - SOCALSPORTBIKES.ORG

dckopp1@gmail. · 05:22 PM

Have a 2003 (excuse my fat finger typing) gsxr 759 k2 had a fire replaced harness and ecm used online. Got all errors cleared but c42 Ive pur cased 100 ohm 1/2 w resistor, becusr cheap China j
Key switch of coarse non-op properly . Hope you guys can follow my typing. C42 , c42 ,c42. Ecm I bough #32920-35f00 reasearched online find out #32820-35f35 will operate also. So bought one of those also instant c42. Was unable to retrieve exact # on harness so purchased one with exact colorcode and pin position on ecm plugs and made sure each wire terminated to proper destiation .c42 on both ecms . I can't seem to find a direct link to dano here but is it possible to flash c42 out of ecms? I just want my bike back help guys.

Rocket · 10-16-2020, 10:11 AM

https://www.socalsportbikes.org/foru...d.php?t=325201

10-15-2020, 05:20 PM	#1
dckopp1@gmail. Member Join Date: Oct 2020 Location: Las vegas Feedback Rating: (0) Posts: 2 Bike(s): Gsxr 750 k2	Gsxr ecm f code oriblems Have a 2003 (excuse my fat finger typing) gsxr 759 k2 had a fire replaced harness and ecm used online. Got all errors cleared but c42 Ive pur cased 100 ohm 1/2 w resistor, becusr cheap China j Key switch of coarse non-op properly . Hope you guys can follow my typing. C42 , c42 ,c42. Ecm I bough #32920-35f00 reasearched online find out #32820-35f35 will operate also. So bought one of those also instant c42. Was unable to retrieve exact # on harness so purchased one with exact colorcode and pin position on ecm plugs and made sure each wire terminated to proper destiation .c42 on both ecms . I can't seem to find a direct link to dano here but is it possible to flash c42 out of ecms? I just want my bike back help guys.
	Last edited by dckopp1@gmail.; 10-15-2020 at 05:22 PM.

10-16-2020, 10:11 AM	#2
Rocket Hero Join Date: Oct 2016 Location: 951 Feedback Rating: (0) Posts: 529 Experience: 10+ years Trackdays: 10+	https://www.socalsportbikes.org/foru...d.php?t=325201